Philips AZ5155 manual General Operation, Mains, Radio Reception

GENERAL OPERATION

MAINS

1.Check if the mains voltage as shown on the type plate (on the bottom of the set) corresponds to your local mains voltage.

Select 110 or 220V by the selector (for some version only).

2. If your set is equipped with a voltage selector, adjust the selector so that it matches with the local mains.

3.Connect the mains lead to the AC MAINS ~ socket and the wall socket.

™The set is now ready for use.

4.To switch off the mains supply completely, pull the mains plug out of the wall socket.

™Disconnect the mains lead when you change over to battery supply, or to protect the set during heavy thunderstorms.

The type plate is located on the bottom of the set.

GENERAL OPERATION

English

1.To switch on the set, adjust the source selector.

2.Adjust the sound using the VOLUME, DYNAMIC BASS

BOOST and INCREDIBLE SURROUND control buttons.

3To switch off the set, adjust the source selector to the TAPE/OFF position, with the cassette keys released.

PLAY•PAUSE￿

SEARCH

RADIO RECEPTION

1Set the source selector to FM or MW.

2.Adjust the sound using the VOLUME, DYNAMIC BASS BOOST and INCREDIBLE SURROUND control buttons.

3.Tune to a radio station using the TUNING knob.

–For FM, pull out the telescopic aerial. To improve FM-reception, incline and turn the aerial. Reduce its length if the FM-signal is too strong (very close to a transmitter).

–For MW, the set is provided with a built-in aerial, so the telescopic aerial is not needed. Direct the aerial by turning the whole set.

4.To switch off, set the source selector to the TAPE/OFF position (with the cassette keys released).

9