TUNING TO RADIO STATIONS
1.Select RADIO source.
™The function indication lights up. 
is displayed briefly and then the radio station frequency is shown.
2.Press BAND once or more to select your waveband.
3.Press SEARCH ∞ or § and release when the frequency in the display starts running.
™The radio automatically tunes to a station of sufficient
reception. Display shows 
during automatic tuning.
™If a FM station is received in stereo, STEREO is shown.
4.Repeat step 3 if necessary until you find the desired station.
• To tune to a weak station, press SEARCH ∞ or § briefly and repeatedly until you have found optimal reception.
To improve radio reception
–For FM, pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong (very close to a transmitter).
–For AM, the set is provided with a
5.To switch off, adjust the POWER slider to TAPE/OFF position
with the keys on the tape deck released.
™The function indicator goes out.
MODE
| SHUFFLE | ALL |
|
CD |
|
| |
|
|
| |
|
|
| BATT |
|
| TUNER | LOW |
|
|
| |
| TAPE |
|
|
• • • | SEARCH | PLAY• | PAUSE | STOP | PROG. |
|
|
|
| ||
|
|
|
|
| SEARCH • • • |
D
English
Programming radio stations
You can store up to a total of 30 radio stations in the memory.
1.Tune to your desired station (see Tuning to radio stations).
2.Press PROG to activate programming.
– Display: PROGRAM flashes.
3.Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station.
4.Press PROG again to confirm the setting.
– Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown.
5.Repeat the above four steps to store other stations.
–You can erase a preset station by storing another frequency in its place.
SHUFFLE | ALL |
|
|
| BATT |
| TUNER | LOW |
|
| |
TAPE |
|
|
STOP | PROG. |
| |
| SEARCH • • • |
STEREOFM
PRESET | BAND |
|
Tuning to preset stations
Press PRESET 4 or 3 until the desired preset station is displayed.
FLE | ALL |
TUNER
BATT
LOW
PRESET
PROG.
BAND
11