Philips AZ 1060, AZ1061 CD PLAYER, English, Playing a CD, Selecting a different track, Finding a passage within a track

CD PLAYER

English

Playing a CD

1.Select CD source.

™ is displayed briefly and the function indication lights up.

2. Press OPEN•CLOSE to open the CD door.

™ Display:

when you open the CD door.

3.Insert a CD or CD-R(W) with the printed side facing up and

close the CD door.

™Display: flashes as the CD player scans the contents of a CD. The total number of tracks and playing time are then shown.

4.Press PLAY•PAUSE 2; to start playback.

™Display: Current track number and elapsed playing time of the track during CD playback.

5.To interrupt playback press PLAY•PAUSE 2;. Press PLAY•PAUSE 2; again to resume play.

™The display freezes and the elapsed playing time flashes when playback is paused.

6.To stop CD playback, press STOP 9

7.To switch off, adjust the POWER slider to TAPE/OFF position with the keys on the tape deck released.

™The function indicator goes out.

Note: CD play will also stop when:

–the CD door is opened;

–the CD has reached the end

(unless you have selected REPEAT or REPEAT ALL);

–you select another source: TAPE / TUNER.

DBB

MODE

AZ 1060

DIG

Selecting a different track

•Press SEARCH ∞ or § once or repeatedly until the desired track number appears in the display.

•If you have selected a track number shortly after loading a CD or in the PAUSE position, you will need to press PLAY•PAUSE 2; to start playback.

Finding a passage within a track

1.Press and hold down on SEARCH ∞ or §.

™The CD is played at high speed and low volume.

2. When you recognize the passage you want, release SEARCH ∞ or §.

– Normal playback continues.

Note:

During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within a track.