Philips AZT9240 manual ECO-PLUS NiMH battery information for versions supplied with, Power Supply

POWER SUPPLY

ECO-PLUS NiMH battery information (for versions supplied with

rechargeable ECO-PLUS NiMH batteries AY 3362 only)

Recharging works only on players with supplied rechargeable

ECO-PLUS NiMH batteries AY 3362.

Recharging the ECO-PLUS NiMH batteries on board

1Make sure you insert the rechargeable ECO-PLUS NiMH batteries AY 3362.

2Connect the mains adapter to the 4.5V DC socket of

the player and then to the wall socket.

y A is shown and ChArGE is displayed for 5 seconds.

•Recharging stops after a maximum of 7 hours, or when you start playback.

3When the batteries are fully recharged, and

FULL appear briefly in the display, before the display switches off.

Notes: – It is normal for the batteries to become warm during recharging.

–If the batteries become too warm, recharging will be interrupted for approximately 30 minutes and Hot is displayed.

–To ensure proper recharging on board, take care that contacts are clean, and you are using only the ECO-PLUS NiMH batteries AY 3362.

Rechargeable ECO-PLUS NiMH battery handling

•Recharging already charged or half-charged batteries will shorten their lifetime. Therefore, after using the rechargeable ECO-PLUS NiMH batteries a few times, discharge them completely before recharging.

•To avoid a short circuit, the batteries should not touch any metal objects.

•When the batteries quickly become empty after recharging, the contacts are dirty or the end of their lifetime has been reached.

English

9