BDL4250EL / BDL4650EL
1.4.Installing and Removing Table Stands (optional)
To install table stands:
1.Ensure your display is powered off.
2.Spread a protective sheet on a flat surface.
3.Grab the carrying handles and place the display
4.After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.
Carrying handle
Thumbscrews
Table stand
Longer portions face the front
To remove table stands:
1.Power off the display.
2.Spread a protective sheet on a flat surface.
3.Grab the carrying handles and place the display
4.Remove screws using a screwdriver and place them in a safe place for reuse.
2