BDL4250EL / BDL4650EL
Network settings
Assign {IP address}, {Subnet Mask}, and {Default gateway} for the display.
Network settings
Network host name |
| 9 |
| 0 | Z | L |
|
|
|
DHCP |
|
|
|
| Disable |
|
|
| |
IP address | 172 | - | 16 | - | 0 | - | 1 | ||
Subnet mask | 255 | - | 255 | - | 0 | - | 0 | ||
Default gateway | 0 |
| - | 0 | - | 0 | - | 0 | |
Login user name |
| a | d | m i | n |
|
|
| |
Login password | 0 |
| 0 | 0 |
| 0 |
|
| |
| [ SET ] |
|
|
|
|
|
| ||
change [SET] in STORE
•DHCP - Choose to enable or disable the DHCP function. If enabled, the display will be assigned IP address, Subnet mask and Default gateway automatically. If disabled, you will be prompted to enter the following values manually. When finished, press [SET] button to store and save the chosen values.
•IP address
•Subnet mask
•Default gateway
•Login user name (The default user name is {admin})
•Login password (The default password is {0000})
Configuration reset
Reset all settings in Configuration1 menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP}, {Configuration1}, {Configuration2}, and {Advanced option} to the factory preset values.
Press [
] or [ ] button to select [Reset], and then press [SET] button to do the reset.
OSD turn off
Set the period of time the OSD
The options are: {5 ~ 120} seconds.
Information OSD
Set the period of time the information OSD is displayed on the upper right corner of the screen.The information OSD will display when input signal is changed.
The information OSD will remain on the screen with {Off} selection. The options are: {1 ~ 60} seconds.
Off Timer
Set the display to turn itself off to standby mode within an amount of time specified.
The options are: {Off, 1 ~ 24} hours from currrent time.
NOTE: When the “Off timer” is activated, the “Schedule” settings will be disabled.
OSD
Adjust the horizontal position of the OSD menu.
OSD
Adjust the vertical position of the OSD menu.
Monitor information
Shows information about your display, including model number, serial number, operating hours and software version.
Monitor information
Model name: | BDL4650EL |
Serial no: |
|
Operation hours: | 0 H 3M |
SW Version: | VER 0.204 |
4.2.7. Advanced option menu
Factory reset
Cancel |
| Reset |
|
|
|
4.2.6. Configuration2 menu
Picture
Screen
Audio
PIP
Configuration1
Configuration2
Input resolution HDMI clock threshold Black level expansion Gamma selection Scan mode
Scan conversion
Film mode
IR control Keyboard control Tiling
Picture
Screen
Audio
PIP
Configuration1
OSD turn off
Information OSD
Off timer
OSD
OSD
Monitor information
Advanced option
Heat status
Input resolution
Set the resolution of the VGA input.This is only required when the display is unable to detect the VGA input resolution correctly.
NOTE: This item is functional for VGA input only.
Configuration2
Advanced option
The options are:
•{1024x768 / 1280x768 / 1360x768 / 1366x768}
•{1400x1050 / 1680x1050}
•{1600x1200 / 1920x1200}
19
