Philips BDL4681XU user manual Film Mode, Progressive, IR Control, Keyboard Control, Tiling

User Manual BDL4681XU

FILM MODE

Note: For VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode) inputs only.

Choose to turn on or off the film mode frame conversion function.

Use the PLUS/MINUS button to toggle between

•AUTO - Enable the film mode frame conversion function for movies and motion pictures. The monitor converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once this function is enabled, it is recommended that you set the SCAN CONVERSION function to

PROGRESSIVE.

•OFF - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and VCR signals.

IR CONTROL

Select the operation mode of the remote control when multiple BDL4681XU monitors are connected via the RS232C connection.

Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between

•NORMAL - All monitors can be operated normally by the remote control.

•PRIMARY - Designate this monitor as the primary monitor for remote control operation. Only this monitor can be operated by the remote control.

•SECONDARY - Designate this monitor as the secondary monitor. This monitor can not be operated by the remote control, and will only receive the control signal from the primary monitor via the RS232C connection.

•LOCK - Lock the remote control function of this monitor. To unlock, press and hold the DISPLAY button on the remote control for 5 seconds.

KEYBOARD CONTROL

Choose to enable or disable the function of the keyboard (control buttons) on the monitor. Use the PLUS/MINUS button to toggle between

•LOCK - Disable the keyboard.

•UNLOCK - Enable the keyboard.

TILING

Note: For the VGA input only.

With this function you can create a single large screen matrix (display wall) that consists of up to 25 BDL4681XU monitors (5 monitors each on the vertical and horizontal sides). This requires you to connect each BDL4681XU monitor in a daisy-chain configuration.

Example:

2 x 2 screen matrix (4 monitors)

H MONITORS = 2

V MONITORS = 2 H MONITORS

MONITORSV	MONITORS
	POSITION
	V

5 x 5 screen matrix (25 monitors)

H MONITORS = 5

V MONITORS = 5 H MONITORS

POSITION

Downloaded From TV-Manual.com Manuals

RETURN TO THE CONTENTS