Philips BDL6531E user manual PIP Size, Large Middle Small PIP Audio, PIP Reset

User Manual BDL6531E

4.2.4.PIP MENU

Note: For COMPONENT, VGA, DVI-D and HDMI inputs only.

PIP
PIP SIZE	SMALL
PIP AUDIO	MAIN
PIP RESET

Sel Adjust Enter Back Quit

PIP SIZE

Select the size of the sub picture in the PIP (Picture-in-Picture) mode.

Use the PLUS/MINUS button to toggle between

• LARGE	• MIDDLE
• SMALL

PIP AUDIO

Select the audio source in the PIP (Picture-in-Picture) mode.

Use the PLUS/MINUS button to toggle between

•MAIN - Select audio from the main picture

•PIP - Select audio from the sub picture.

PIP RESET

Reset all settings in the PIP menu.

Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. Select YES and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu.

Notes:

• The PIP function is only available under certain signal source combinations as shown in the table below.

				Main picture signal source
		VIDEO	S-VIDEO	COMPONENT	VGA	DVI-D	HDMI
	VIDEO
Sub	S-VIDEO
picture	COMPONENT
signal
	VGA
source
	DVI-D
	HDMI

(: PIP function available, : PIP function unavailable)

• The availability of the PIP function will also depend on the resolution of the input signal being used.

RETURN TO THE CONTENTS