Philips BDP5010/F7 manual 33

LIST OF SETTINGS

Category		Menus/Options		Description
Video	HDMI Video	HDMI 1080p/24	Auto	“Auto”:
Output			Off	Outputs the picture in 1080p/24
				(1080 progressive with 24 frames per
		• This feature is available		second) when it meets all the
				conditions listed below:
		only when the display
				• The video resolution and the frame
		device is connected by
				rate of the material is 1080p/24 .
		an HDMI cable.
				• “HDMI Video Resolution” setting is
		• Refer to page 38 for
				set to “1080p”.
		more information.
				• The display device supports the
				1080p/24 output.
				“Off”:
				• Outputs the picture in 60p.
				(60 frames per second, progressive)
		HDMI Video Resolution*	Auto	Sets the resolution of the video signal
		• This feature is available	480p	being output from the HDMI OUT.
		only when the display	720p	• The selected resolution must also be
		device is connected by	1080i	supported by your TV monitor.
		an HDMI cable.	1080p

•Refer to page 38 for more information.

		HDMI Deep Color	Auto	Reduces the posterization effect of
		• This feature is available	Off	the playback picture.
		only when the display		“Auto”:
		device is connected by		Reduces the posterization effect by
		an HDMI cable, and		automatically outputting the 12 bit
		when it supports Deep		color whenever the unit recognizes
		Color feature.		the connected display device
				supports Deep Color feature.
				“Off”:
				Outputs the standard 8 bit color.
Setup	Component Output	480i		Sets the resolution for the component
				• The selected resolution must also be
		480p		output picture.
Advanced		720p	With regard to the	not supported by your TV by mistake
		1080i	DVD-Video with a copy	supported by your TV monitor.
				• Refer also to your TV’s manual.
			protection, the resolution
				• If you have selected the resolution
			will be set to 480p
			regardless of the setting	and the picture gets disturbed, press
			here.
				and hold [B (PLAY)] on the front
			If 480p output is not
				panel for 5 seconds to change the
			available, 480i will be
				setting back to its default.
			output.
				• When HDMI cable is connected, only
				“480i” and the resolution selected in
				the “HDMI Video Resolution” will be
				available.
	De-interlacing Mode	Auto		“Auto”:
		Video		Automatically detects the film or the
				video content, and appropriately
				converts it.
				“Video”:
				Selects when the picture is distorted
				when using “Auto”.
	Black Level	On		Adjust the brightness to compensate
		Off		for ambient room light.
	Noise Reduction	Off		Reduces the noise of the playback
	• Not available for	MPEG NR		picture.
	BD-video.	3D NR		“Off”:
		Combo (3D + MPEG)		Deactivates the Noise Reduction.
				“MPEG NR”:
				Reduces the block noise seen
				characteristically in the MPEG files.
				“3D NR”:
				Reduces the rough background noise
				so that you can feel the greater feeling
				of depth.
				“Combo (3D + MPEG)”:
				Activating both “MPEG NR” and
				“3D NR”.

Others Setup Function PlaybackSetup Basic Connections Introduction

EN 33