TROUBLESHOOTING

 

Problem

 

Tip

 

No reaction to the remote control.

 

Connect the product to the power outlet.

 

 

 

Point the remote control at the product.

 

 

 

Insert the batteries correctly.

 

 

 

Insert new batteries in the remote control.

 

No video signal on the display

 

Turn on the TV.

 

device.

 

 

 

 

Set the TV to the correct external input.

 

 

 

Select the correct video resolution using [HDMI] .

 

 

 

Press and hold [B (PLAY)] on the front panel for 5 seconds to change the

POWER

 

 

setting back to its default.

 

 

 

No audio / video signal on the

 

If the unit is connected to the unauthorized display device with an HDMI

 

 

 

display device via HDMI cable.

 

cable, the audio/video signal may not be output.

 

 

 

 

 

No high-definition video signal on

 

Does the disc contain high-definition video? High-definition video is not

 

the TV.

 

available when the disc does not contain it.

 

 

 

Does the TV support high-definition video? High-definition video is not

 

 

 

available when the TV does not support it.

 

 

 

 

 

No audio signal from the

 

Assign the audio input of the TV to the corresponding video input.

 

loudspeakers of the TV.

 

 

 

 

 

 

 

No audio signal from the

 

Turn on the audio system.

 

loudspeakers of the audio system.

 

 

 

 

Set the audio system to the correct external input.

 

 

 

Increase the volume level of the audio system.

 

 

 

 

 

No 5.1-channel audio from the

 

Does the disc contain 5.1-channel audio? The 5.1-channel audio is not

 

 

 

loudspeakers of the audio system.

 

available when the disc does not contain it.

 

 

 

 

 

 

 

Does the audio system support 5.1-channel audio? The 5.1-channel audio is

 

 

 

not available when the audio system does not contain it.

 

 

 

 

 

 

 

In the settings menu, set “HDMI Audio” to “Off”.

 

Cannot play back a disc.

 

Make sure that the product supports the disc.

 

 

 

Make sure that the Blu-ray Disc player supports the region code of the DVD

 

 

 

or BD.

 

 

 

(BD: A: DVD: All or 1)

 

 

 

 

 

 

 

For DVD-RW/-R, make sure that the disc is finalized.

 

 

 

Clean the disc.

 

SD Memory Card cannot be read.

 

The format of the card does not match that accepted by this unit or the card

 

 

 

is not compatible.

 

 

 

 

 

Cannot play back JPEG files from a

 

Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.

GENERAL

disc.

 

 

 

 

 

Cannot play back DivX® files from a

 

Make sure that the file extension is .avi, .AVI, .divx or .DIVX

 

Cannot play back Windows Media™

 

Make sure that the sample rate of the Windows Media™ Audio files is 44.1

 

Audio files from a disc.

 

kHz or 48 kHz.

 

disc.

 

 

 

 

 

 

 

in the upper right hand corner

 

The operation is not possible.

 

 

 

 

of the screen.

 

 

 

 

 

 

 

Cannot find a JPEG file.

 

Make sure that the selected group (folder) does not contain more than

 

 

 

9,999 files for DVD, and 999 files for CD.

 

 

 

Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.

 

Cannot find a Windows Media™

 

Make sure that the selected folder does not contain more than 9,999 files

 

Audio file.

 

for DVD, and 999 files for CD.

 

 

 

Make sure that the file extension is .wma or .WMA for Windows Media™

 

 

 

Audio.

 

 

 

 

 

Error message appears when I

 

Make sure that the unit is connected to the PHILIPS brand EasyLink TV and

 

select “Auto” in the “Player Menu”.

 

the “EasyLink (HDMI CEC)” is set to “On”

 

 

 

 

 

 

 

This error message may appear when your TV’s OSD language is not

 

 

 

supported by this unit.

 

 

 

 

Others Setup Function PlaybackSetup Basic Connections Introduction

EN 47