Philips BDP5110 manual 38 EN

LIST OF SETTINGS

Advanced Setup

Category		Menus / Options		Description
Video	HDMI Video	HDMI 1080p/24	Auto	“Auto”:
Output			Off	Outputs the picture in 1080p/24
				(1080 progressive with 24 frames per
		• This feature is available		second) when it meets all the
				conditions listed below:
		only when the display
				• The video resolution and the frame
		device is connected by
				rate of the material is 1080p/24 .
		an HDMI cable.
				• “HDMI Video Resolution” setting is
		• Refer to page 43 for
				set to “1080p”.
		more information.
				• The display device supports the
				1080p/24 output.
				“Off”:
				• Outputs the picture in 60p.
				(60 frames per second, progressive)
		HDMI Video Resolution*	Auto	Sets the resolution of the video signal
		• This feature is available	480p	being output from the HDMI OUT jack.
		only when the display	720p	• The selected resolution must also be
		device is connected by	1080i	supported by your TV monitor.
		an HDMI cable.	1080p

•Refer to page 43 for more information.

	HDMI Deep Color	Auto	Reduces the posterization effect of
	• This feature is available	Off	the playback picture.
	only when the display		“Auto”:
	device is connected by		Reduces the posterization effect by
	an HDMI cable, and		automatically outputting the 12 bit
	when it supports Deep		color whenever the unit recognizes
	Color feature.		the connected display device
			supports Deep Color feature.
			“Off”:
			Outputs the standard 8 bit color.
Component Output	480i		Sets the resolution for the component
	480p		output picture.
			• The selected resolution must also be
	720p	With regard to the
			supported by your TV monitor.
	1080i	DVD-video with a copy
			• Refer also to your TV’s manual.
		protection, the resolution
			• If you have selected the resolution
		will be set to 480p
			not supported by your TV by mistake
		regardless of the setting
			and the picture gets disturbed, press
		here.
			and hold [B (play)] on the front
		If 480p output is not
			panel for 5 seconds to change the
		available, 480i will be
			setting back to its default.
		output.
			• When HDMI cable is connected, only
			“480i” and the resolution selected in
			the “HDMI Video Resolution” will be
			available.
De-interlacing Mode	Auto		“Auto”:
	Video		Automatically detects the film or the
			video content, and appropriately
			converts it.
			“Video”:
			Selects when the picture is distorted
			when using “Auto”.
Black Level	On		Adjust the brightness to compensate
	Off		for ambient room light.
HD Noise Reduction	On		Reduces the noise of the playback
			picture.
	Off
			“On”:
			Activates the Noise Reduction.
			“Off”:
			Deactivates the Noise Reduction.

38 EN