SETUPS
•The range of input number is between 0 and 255.
•If you enter a number larger than 255, the number will automatically be 255.
•The manually entered number will be saved even if you change the setting to “Auto(DHCP)”.
•When you enter a wrong number, press [RED] to cancel. (the number will be back to “0”.)
•If you want to enter 1 or 2 digit number in one cell, press [B] to move on to the next cell.
•If the entered IP address or the default gateway or primary DNS number is same as the default setting, IP address setting will be set to “Auto(DHCP)”. (The manually entered number will be saved).
•When IP address setting is set to “Manual”, the setting of DNS setting will automatically be “Manual” and when IP address setting is set to “Auto(DHCP)”, you can set either “Auto(DHCP)” or “Manual” for DNS setting.
Proxy Setting1)Follow steps 1) to 4) in “Connection Test” on page 48.
2)Use [K / L] to select “Enable(Custom)”, then press [OK].
3)Use [K / L] to select “Proxy Setting”, then press [OK].
4)Use [K / L] to select the desired setting, then press [OK].
•For default settings, select “Do Not Use”.
•If you need to change the proxy setting as instructed by your Internet service provider to set the designated proxy address and port, select “Use”.
If you select “Use”, follow the following instructions to set the proxy address and proxy port.
• The keyboard screen will appear.
Proxy Setting
Proxy Address
| xxxxxxxx_ |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 1 | 2 | 3 | 4 | 5 | 6 |
| 7 | 8 | 9 | 0 |
|
|
|
| a | b | c | d | e | f |
| g | h | i | j |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| k | l | m | n | o | p |
| q | r | s | t |
|
|
|
| u | v | w | x | y | z | . | - | _ | OK |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear |
|
|
| All Clear |
|
|
| a/A/@ | OK | |||||
[K / L / s / B] : Move the highlight.
[Number buttons] : Enter number.
[OK] : Enter the highlighted number / word. *[RED] : Clear the entered number or word.
[GREEN] : Clear all the entered numbers or words.
[BLUE] : Switch between abc, ABC and @!? *[YELLOW] : Set the entered number or word.
* These buttons can be used in other network settings.
After you enter all correctly, press [YELLOW] to go to the proxy port setting screen.
Proxy Setting
Proxy Port
x
Clear | OK |
•Confirmation message will appear. Select “Yes” to complete the settings.
Proxy Address | xxxxxxxxxxxxxxx |
Proxy Port | xxxxx |
|
|
Is Setting OK?
Yes
No
5)Press [BACK U] to go back to the previous screen, or press [
(home)] to go back to the home menu.
•The range of input number for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)
•For proxy port, the selected ports may be blocked and not be able to use depending on your network environment.
•If the proxy address is entered with blank only, proxy server setting will be set to “Do Not Use”.