Basic Functions
Demonstration mode
The system has a demonstration mode that shows the various features offered by the system.
To activate the demonstration
●In standby mode, press and holdÇon the system until "WELCOME" is displayed.
➜ The demonstration will begin.
To deactivate the demonstration
●Press and holdÇon the system until "DEMO OFF" is displayed.
➜ The system will switch to standby mode.
Note:
–If you have not deactivated the demonstration, it will resume five seconds after the system switches to standby mode.
Switching the system on
In standby/demonstration mode
●Press STANDBY ON to switch on the last selected source.
●Press CD 1/2/3, TUNER, TAPE (TAPE 1/2), or AUX (AUX/CDR).
●Press OPEN/CLOSE.
➜ The system will switch to CD mode.
Switching the system to standby mode
In demonstration mode
●Press and hold Ç on the system.
In any other source mode
●Press STANDBY ON (or B on the remote control).
➜ The clock will appear on the display when the system is in standby mode.
Dim mode
You can select the desired brightness for the display.
●In any source mode (except standby mode), press DIM MODE repeatedly to select : DIM 1, DIM 2, DIM 3 or DIM OFF.
➜ DIM is shown, except for DIM OFF mode.
DIM | Brightness | Spectrum |
mode |
| Analyser |
1 | normal | off |
|
|
|
2 | half | on |
|
|
|
3 | half | off |
|
|
|
OFF | normal | on |
|
|
|
Note:
–In standby mode, pressing DIM MODE to select half or full brightness for clock display.
Volume control
Press MASTER VOLUME (or press VOL + or - on the remote control) to increase or decrease the volume level.
To listen through the headphones |
|
● Connect the headphones plug to | MIC |
the n socket at the front of the |
|
system. |
|
➜ The speakers will be muted. |
|
To switch off the volume temporarily
●Press MUTE on the remote control.
➜ Playback will continue without sound and "MUTE" is displayed.
●To restore the volume, press MUTE again or increase the volume level.
E n g l i s h
13
pg | 13 | 12/24/01, 10:56 AM3139 115 21251 |
