Tape Operation/Recording
Playing tapes
To playback a selected tape deck
●PressÉon tape deck 1 or 2.
➜ The tape will stop at the end of playback.
Continuous playback of two tapes
1Load the tapes in tape deck 1 and 2.
2PressÉon tape deck 2.
3Press Åon tape deck 1, followed byÉ.
➜ Playback will begin from tape deck 2 and continue with tape deck 1. It will stop at the end of tape deck 1.
To interrupt playback
●Press Å.
●To resume playback, press Åagain.
To stop playback
●Press 70.
Rewinding / Fast forwarding
1Stop playback, press à or á.
➜ The tape will stop automatically at the end of rewinding or fast forwarding.
2Press 70 to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it is also possible to select another source (CD or TUNER, for example).
General information on recording
●If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source.
●For recording, use only tape of IEC type I (normal tape).
●The recording level is set automatically, regardless of the position of the Volume, DBB, DSC and so forth.
●The tape is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds.
●To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
IMPORTANT!
–Recording is permissible if copyright or other rights of third parties are not infringed upon.
–Recording is possible only on tape deck 1.
E n g l i s h
21
pg | 21 | 3139 115 21251 |
12/24/01, 10:57 AM |
