Tape Operation / Recording
E n g l i s h
Preparation for recording
1Load a recordable tape into tape deck 1 with full spool to the left.
2Prepare the source to be recorded. CD 1/2/3 – load the disc(s).
TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape deck 2 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
➜ REC starts flashing.
●It is not possible to listen to another source.
●It is not possible to activate the timer function during recording or tape dubbing.
CD Synchronised start recording
1Press CD 1/2/3 to select the disc.
●You can programme the tracks in the order you want them to be recorded (refer to “CD Operation - Programming the disc tracks”).
2Press ● on tape deck 1 to start recording. ➜ The disc will start playback automatically.
To stop recording
●Press 70 on tape deck 1, then press Ç to stop disc playback.
Note:
– During CD synchronised start recording, do not fast forward/rewind the tape in tape deck 2.
One touch recording / Recording the mixed sound
versions)
1Press CD 1/2/3 , TUNER or AUX to select the source.
●You can connect a microphone to record the mixed sound (refer to “Karaoke - Microphone Mixing”).
2Start playback of the selected source.
3Press ● on tape deck 1 to start recording.
To stop recording
●Press 70 on tape deck 1.
22
Dubbing tapes
1Load the prerecorded tape in tape deck 2.
●Make sure both tapes have their full spool to the left.
2Press Åon tape deck 1 and followed by ●.
3PressÉon tape deck 2.
➜ Recording will start automatically.
●Dubbing of tapes is possible on one side of the tape only. To continue recording on the reverse side, at the end of side A, flip the tape to side B and repeat the procedure.
To stop dubbing
●Press 70 on tape deck 1 and 2.
Notes:
–Dubbing of tapes is possible only from tape deck 2 to tape deck 1.
–To ensure good dubbing, use tapes of the same length.
pg | 22 | 3139 115 21251 |
12/24/01, 10:57 AM |
