![](/images/new-backgrounds/1217037/2170379x1.webp)
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow.
2
Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated.
3
Replace the battery compartment lid.
Erasure Prevention
Video cassette tapes have record tabs to ensure that recordings are not accidentally erased.
Before Using the TV/VCR 5
1
2
3
1
To prevent accidental erasure, break off the tab with a screwdriver.
2
To record again, cover the hole with cellophane tape.
Using the Remote Control
●Point the remote control at the TV/VCR’s remote sensor.
●Do not put objects between the remote control and the TV/VCR.
1
2
TV/VCR Maintenance
●In this TV/VCR, use only tapes with the mark.
●Make sure any light adhesive
●Periodic maintenance is required to maintain your TV/VCR’s excellent performance. This TV/VCR has an automatic head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service cen- ter should perform this service.
Helpful Hints
•The remote control and its batteries are supplied.
•Do not mix alkaline and man- ganese batteries.
•Do not mix old and new batteries.