Automatic Operation Features | Philips CCA132AT manual

50 Automatic Operation Features

The following playback features will always operate.

Automatic Playback

When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject, Off

When a tape is played, fast forwarded, or recorded to its end, the TV/VCR will rewind the tape, stop, turn itself off, and eject the tape.

Memory Rewind, Power Off

When the POWER button is pressed while the TV/VCR is rewind- ing a tape, REW → POWER OFF will appear on-screen. The TV/VCR will turn itself off when the tape has finished rewinding.

If a real-time counter memory is set, the TV/VCR may only rewind the tape to the point at which the counter was set to zero, then turn itself off.

Tape Eject

A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape can not be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

Automatic Tracking Adjustment

The TV/VCR automatically adjusts the tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking

To adjust the tracking manually, press the CHANNEL o/p but- tons on the TV/VCR or the TRACKING m/n buttons on the remote control.

Tracking returns to Automatic Tracking Adjustment when a tape is inserted or when the STOP/p button is pressed.

Before	After
Tracking	Tracking
Adjustment	Adjustment

Image 50

Philips CCA132AT owner manual Automatic Operation Features

Contents

CCA132AT Dear Philips Magnavox product owner For Customer Use Introduction FeaturesSafety Precautions Philips Consumer Electronics Company recommends that Table of Contents TV/VCR Maintenance Putting Batteries in the Remote ControlUsing the Remote Control Erasure Prevention Rod Antenna Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Hooking Up the TV/VCR cont’d Crooked Pin Straight Pin Tons to select another channel You cannot set up channels if you are using a Cable BoxTurning On the TV/VCR Press the Menu button Press the STATUS/EXIT button Automatic Channel Setup Press the STATUS/EXIT button once or twice Adding/Deleting ChannelsPress the PLAY/ o button or the STOP/ p button to select Cable Box users must set the clock manually Setting the ClockManual Clock Setting Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel Selection Wait for the TV/VCR to find the time Manual PBS Channel Selection Press the PLAY/ button or the STOP/ button to Select SET PBS CH. MANUAL. Then, press the F.FWD/B Daylight-Savings Time Time Zone Front Panel ANTenna Jack AC Power CordRear Panel Remote Control Buttons STATUS/EXIT Button STOP/ ButtonREWind/ Button Menu Button Adjusting the Picture Controls More brilliant Adjusting the Picture Controls cont’dDecrease Increase Softer If you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFF Press the PLAY/ button or the STOP/ button to select Reminder Playing Recording options are on pages RecordingGiven below Distortion may appear on the tape One-Touch Recording Audio and video cables are not included Rerecording Tape DuplicationDifferent brands of equipment may operate differently Timer Recording Daily Timer Recording cont’d Rect information Timer Recording cont’d Checking or Clearing Timer Recordings With the TV/VCR on, press the Menu button Defeat Recording Repeat Play B Repeat Play Insert a tape in the TV/VCR Press the Menu button Repeat Play cont’d Press the STATUS/EXIT button to remove the display. a Real-Time Counter Memory Press the STATUS/EXIT button. The real-time counter will Super High Speed Searching LP/SLP Playback OptionsForward and Reverse Searching SP/LP/SLP Viewing a Still Picture SmartLock SmartLock cont’d Example Specific Ratings To change the access code, follow these steps Blue Background Ground Setting the Sleep Timer If the power fails, you might lose Sleep timer setting Volume Bar Menu Closed CaptionExample Screen May be delayed for a few seconds Closed Caption cont’d Automatic Operation Features Specifications Glossary Helpful Hints Helpful Hints cont’d Limited Warranty TV/VCR Combination Channel Above Adding Deleting Reviewing Setup Buttons Index Supplied Accessories