32 Rerecording (Tape Duplication)

CCB134

AUDIO and VIDEO OUT Jacks on source unit

(VCR or Camcorder)

VIDEO AUDIO OUT

IN

AUDIO VIDEO

STOP

REW

EJECT

 

 

 

EARPHONE

Audio Cable (white) from

AUDIO OUT to AUDIO In

Video Cable (yellow) from

AUDIO and VIDEO In

VIDEO OUT to VIDEO In

Jacks on TV/VCR

1

Make the connections shown above, using audio and video cables. Make sure the source unit (VCR or camcorder) is connected to a power source.

2

The source unit will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the unit.

3

The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR power will turn on automatically.

4

Point the TV/VCR remote control at the TV/VCR. Press the COMBI button, then press Number buttons 0, 0 so that A/V IN appears on the screen.

5

Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed (SP or SLP) appears on the screen.

6

Press the PLAY button on the source unit and the REC(ord)/OTR button on your TV/VCR at the same time. Copying will begin.

7

To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source unit.

Helpful Hints

Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

If a program has copyright protec- tion, it may not record clearly.

Different brands of equipment may operate differently.

Make sure all connections are secure. Otherwise, you may not record both picture and sound.

Audio and video cables are not included.

Page 32
Image 32
Philips CCB 134AT, CCB 194AT Rerecording Tape Duplication, Different brands of equipment may operate differently