Specifications | Philips CCB 134AT, CCB 194AT specification

62 Specifications

General

CRT: 13-inch in line gun (CCB134) 19-inch in line gun (CCB194)

Television system: NTSC-M

Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard

Video Heads: Four heads

Tape width: 1/2 inch (12.65 mm) Tape speed

SP: 33.35 mm/sec.

LP: 16.67 mm/sec.

SLP: 11.12 mm/sec.

Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)

Relative Humidity: 10% to 75%

Power requirement: AC 120V, 60Hz

Power consumption: 65W (CCB134) 90W (CCB194)

Sound output: 1W Dimensions:

15-3/4" (H) x 15-3/16" (W) x 14-13/16" (D) 400mm x 386mm x 377mm

19-5/8" (H) x 19-3/8" (W) x 18-11/16" (D) 498mm x 492mm x 474mm

Weight: 24.3 lbs (11.0 kg) (CCB134)

Weight: 44.1 lbs (20.0 kg) (CCB194)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

1-125

FM Radio Channels

88.0 ~ 108.0 MHz

Terminals

Antenna In: VHF/UHF 75 ohms unbalanced

Video In: RCA connector

Audio In: RCA connector

Earphone: 3.5 mm CES

Electrical Specifications

Video input level: 0.5~2.0Vp-p

Audio input level: -10dBv

Video S/N ratio

SP: More than 42dBµ

Audio S/N ratio

SP: More than 38dB

(CCB134)

(CCB194)

Designs and specifications are subject to change without notice and without our legal obligation.

Image 62

Philips CCB 134AT, CCB 194AT owner manual Specifications

Contents

CCB134AT CCB194AT This bolt of lightning indi- cates uninsulated material Dear Philips product ownerFor Customer Use Model No Serial No Introduction FeaturesSafety Precautions Declaration of Conformity Table of Contents TV/VCR Maintenance Putting Batteries in the Remote ControlUsing the Remote Control Erasure Prevention Rod Antenna Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Bent pin Hooking Up the TV/VCR cont’dAUDIO/VIDEO Jacks on front Crooked Pin Straight Pin Press the Menu button. The screen shown below will appear Press the Combi button, then press the Power buttonTurning On the TV/VCR Language Selection Press the Combi button, then press the Menu button Automatic Channel Setup Wait for the TV/VCR to set up channels Repeat steps 3-4 to add or delete other channels Adding/Deleting ChannelsPress the PLAY/o button or the STOP/p button to select Programming of the last channel you selected will appear Cable Box users must set the clock manually Setting the ClockManual Clock Setting Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel Selection NOW Searching flashes on the TV/VCR screen Wait for the TV/VCR to findTime Manual PBS Channel Selection Use the Number buttons to select your PBS station Wait for the TV/VCR to find the time Daylight-Savings Time Time Daylight Savings Time Press the PLAY/ button or the STOP/ button to select PRIM. SETUP. Then, press the F.FWD/B buttonTime Zone Within 30 seconds, press the CABLE/DBS button Setting the Remote to Operate a Cable Box/DBSPress the Mute button Setting the Remote to Operate a Cable Box/DBS cont’d Power Button Earphone Jack Volume o/ p ButtonsWireless Remote Sensor Cassette Compartment ANTenna Jack AC Power CordRear Panel Connect your antenna or cable here Remote Control Buttons Memory Button VOLume m/ n ButtonPAUSE/STILL Button REWind/ Button When you finish, press the STATUS/EXIT button Adjusting the Picture ControlsAdjust the picture control. Refer to the chart on Press the REWind/ button or the F.FWD/B button to Decrease Increase Decreased brightness If you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFF Playing Insert a tape in the TV/VCR Press the RECord/OTR button once to start recording Power button to turn on the TV/VCR, if necessaryRecording One-Touch Recording OTR Rerecording Tape Duplication Different brands of equipment may operate differently Defeat Recording Follow the steps below to prevent accidental recording Daily Timer RecordingLowed by the SET Clock menu Timer Recording cont’d Timer Recording cont’d FM 0 Surf VOL Checking or Clearing Timer Recordings Station Setting Up the VCR Plus+ Programming SystemTV Channels Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System You have completed the steps on pages Timer Recording With the VCR Plus+ Programming System cont’d Real-Time Counter Memory Appear on the screen ON-SCREEN Mode Defeat Recording OFF Repeat Play B Repeat Play Insert a tape in the TV/VCR Repeat Play cont’d Flashing a will become a flashing B Super High Speed Searching LP/SLP Playback OptionsForward and Reverse Searching SP/LP/SLP Viewing a Still Picture Blue Background SmartLock To block ratings, follow the steps below Example Specific Sub-ratings SmartLock cont’dRatings are defined on To change the access code, follow these steps After you enter the code, the Smartlock menu will appear To check the SmartLock settings, follow these steps TV-Y7 Press the Combi button, then press the SLEEP/WAKE UP button Sleep TimerTimer during a recording Wake Up Timer Menu Closed CaptionExample Screen Half-screen text Closed Caption cont’dStandard Closed Captions Volume will stay at the same level Volume Bar/Smart SoundVolume Bar Smart Sound Automatic Operation Features FM Radio SmartPicture/FM RadioSmartPicture Follow the steps below to listen to FM radio stations If another remote control beeps Press the Mute button, then press the PAUSE/STILL button Reminder Press the Combi button, then press the Menu button Index Search Specifications Glossary Helpful Hints Helpful Hints cont’d Model # Serial # Limited WarrantyPlease contact Philips at French Speaking English Speaking Index Supplied Accessories