10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below.
1
Press the MENU button.
POWER | SLEEP/WAKE UP |
>PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS
2
PRESS B
1
| PLAY |
|
REW |
| F.FWD |
| STOP |
|
MENU | STATUS/EXIT | CLEAR |
1 | 2 | 3 |
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
>SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW
VOLUME BAR | [ON] |
SET CLOCK |
|
SELECT KL CHOOSE B
TO END PRESS EXIT
4 | 5 | 6 | CH. |
| |||
7 | 8 | 9 |
|
| 0 | ALT. CH | VOL. |
|
| ||
SPEED | MEMORY | PAUSE/STILL |
|
REC/OTR | TRACKING | MUTE | |
3
Press the PLAY/▲ button or the STOP/▼ button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. AUTO CH PROGRAMMING ... will appear on the screen. The TV/VCR distinguishes between TV channels and cable chan- nels automatically, and the TV/VCR will memorize its available channels.
4
Wait for a few minutes. When setup is complete, CHANNELS ARE SET will appear on the screen. Then the programming of the lowest channel number placed in the TV/VCR’s memory will appear on the screen. Now, when you press the CH(annel) m/n button, you will scan only through channels you receive.
4 Wait for the TV/VCR to set up channels.
Helpful Hints
•Line Input mode will always be stored in the TV/VCR’s memory as channel 00. You cannot delete it.
•You can select channels not stored in the memory by using the number buttons on the remote control. However, you can not select non- memorized channels using the CH(annel) m/n buttons.
