Philips CCB 252AT owner manual Checking or Clearing Timer Recordings

Timer Recording (cont’d) 35

Checking or Clearing Timer Recordings

1
With the TV/VCR on, press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select
VCR PROGRAM, then press the F.FWD/B button.
3	1
Press the PLAY/▲ button or the STOP/▼ button to select
PROGRAM REVIEW, then press the F.FWD/B button.
The timer recording information for the program in the lowest
numbered position will appear on the screen. If no timer record-
ings are programmed, nothing will happen when you select PRO-
GRAM REVIEW and press the F.FWD/B button.
4

2-4

POWER SLEEP/WAKE UP

	PLAY
REW			F.FWD
	STOP			5
MENU	STATUS/EXIT		CLEAR
1	2	3
4	5	6	CH.
7	8	9
	0	ALT. CH	VOL.
SPEED MEMORY		PAUSE/STILL
REC/OTR	TRACKING		MUTE

Press the F.FWD/B button to display information about the next programmed timer recording. (If you do not press a button within 10 seconds, information about the next pro- grammed timer recording will appear.) This will continue until all positions have been displayed. Then, the menu will disappear. You can exit the Program Review at any time by pressing the STA- TUS/EXIT button.

5

To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

6

Repeat steps 1 - 4 to make sure you have cleared the cor- rect position.

Helpful Hint

•With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, pro- grammed timer recordings will be restored when the clock is reset. (The clock will reset itself automati- cally if you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.