SECURING THE PREMISES

Arming the System

Arming the System With No Delay

Use NO DELAY with STAY mode when you are staying home and do not expect anyone to use the entrance door.

Use NO DELAY with AWAY mode when the premises will be vacant for extended periods of time such as vacations, etc.

When armed with NO DELAY, the system will sound an alarm if a protected door or window is opened, including the entrance door. You may leave through the entrance door during the exit delay period without causing an alarm, but an alarm will sound as soon as someone reenters.

To arm with NO DELAY:

Your user code**

+ AWAY or STAY

+

NO DELAY

** See Quick Arming paragraph.

Quick Arming

If Quick Arm was programmed by the installer, you do not need to enter the security code to arm the system. Instead, simply press and hold down the desired arming key for at least 2 seconds. The security code must always be used to disarm the system, however.

To arm if Quick Arm is active:

AWAY or STAY hold down for at least 2 seconds

To arm with NO DELAY if Quick Arm is active:

least 2 seconds

AWAY or STAY then NO DELAY hold down for at

IMPORTANT: The Babysitter Code and Installer Code cannot disarm the system unless it was used to arm the system. In addition, if the system is armed by pressing and holding the Quick-Arm buttons, neither the Babysitter Code nor Installer Code can disarm the system.

– 17 –

Page 17
Image 17
Honeywell LYNXR-I manual Arming the System With No Delay, Quick Arming, To arm with no Delay if Quick Arm is active