Honeywell LYNXR-I manual Xx bd

USER FUNCTIONS

Scheduling User Interface

		Begin Time (minute)
b :	xx	[xx] = begin minute 0 to 59
		[*] = continue
		[#] = return to previous prompt
		Begin Day	• If the value programmed in the Event Identifier is “3”,
xx : bd		[xx] = begin day 01 to 17	“4”, or “5”, and the current entry is completed, the
		[*] = continue	system will save all field data up to this field. The
		[#] = return to previous prompt	system will beep four times and go back to the first field
			(Schedule Number) with the schedule number
			advanced.
			• If the value programmed in the Event Identifier is “1”
			or “2”, and the current entry is completed, the system
			will advanced to the next programming field - End Time
			(hour).
			NOTE: See figure 2 for the definition of begin day entries.
		End Time (hour)	• The end hour is a two-digit entry. To enter the hour 3,
xx : AE
		[xx] = end hour 00 to 12	press “0” followed by “3”.
		[*] = continue	• The end hour “00” indicates this schedule does not have
		[#] = return to previous prompt	a end time.
		End Time (am/pm)	• Press “0” to select AM or “1” to select PM.
		[0] = end time, am (A)
		[1] = end time, pm (P)
		[*] = continue
		[#] = return to previous prompt
		End Time (minute)
E :	xx
		[xx] = end minute 0 to 59
		[*] = continue
		[#] = return to previous prompt
		End Day	NOTE: See figure 2 for the definition of end day entries.
xx : Ed
		[xx] = end day 01 to 17	• If the event identifier is set to “2” upon completion of
		[*] = continue
		[#] = return to previous prompt	this field, the current schedule data will be saved and
			the system will go back to the next schedule number.
		Device Number	[*] will accept and save the entire schedule event. The
x	: dn	[xx] = device number 1 to 8	system will beep four times and go back to the beginning
		[*] = continue	of the programming field (Schedule Number) with the
		[#] = return to previous prompt	schedule number advanced. If the current schedule
			number is 8, the system will wrap around and set the
			schedule number to 1.
			NOTE: For X10 devices.

– 33 –