USER FUNCTIONS
AUX Function
General Information
The
AUX
key may have been programmed to either perform a predefined function or to send a preset
message to a pager/”Follow Me” system phone number (see Pager Feature section for pager operation or the Follow Me Announcement Feature section for “Follow Me” operation). Ask your installer which function has been assigned for your system.
AUX
Key: |
|
| PAGING FUNCTION |
| FOLLOW ME VOICE MESSAGE |
If programmed for the AUX function, you can use the
AUX
key to activate a string of up to 20
keystrokes that have been stored in the system’s memory. Typical functions include:
•Seldom used but repeatable sequences
•Arming sequences that involve bypassing zones before arming
•Device activation sequences
Defining the AUX Function
The system must be disarmed before defining a function.
1.Enter 
Master user code
+
FUNCTION
+
AUX
(hold down at least 2 seconds until 4 beeps sound).
2.Press the desired command sequence, up to 20 keystrokes. Press the command in the sequence.
3.Press the AUX key twice to end the definition.
AUX
key between each
For example, to bypass Zones 10 and 11 and arm AWAY with NO DELAY, enter the following string:
+ Master user code
FUNCTION
+
AUX + [6] + [10] + [11] +
AUX
+
AWAY
+ [0] +
AUX
+
AUX
Note that the
AUX
key is included in the 20 keystroke maximum.
Performing the AUX function
Press and hold down the AUX key (hold down at least 2 seconds until 4 beeps sound), then enter
The defined function will begin.
Your user code
– 28 –
