SYSTEM OVERVIEW
About the Display and Indicators
Display Definitions (for other displays, see Trouble Messages)
AWAY LOW BAT AC INSTANT CHIME TEST
STAY REC MESSAGE ALARM FIRE BYPASS FAULT
ALARM: Appears when the system is armed and an intrusion has been detected (also appears during a fire alarm or audible emergency alarm). Accompanied by the protection zone that is in alarm.
AWAY: All burglary zones, interior and perimeter, are armed.
INSTANT: Entry delay is turned off.
STAY: Perimeter burglary zones, such as protected windows and doors, are armed.
UL | |
| |
| |
|
|
FIRE: Appears when a fire alarm or fire fault is present. Accompanied by a display of the zone that is in alarm.
LOW BAT: Low battery condition in a wireless sensor (if zone number is displayed) or low system battery (if no zone number is displayed). If 00 is displayed, a wireless keypad (5827) has a low battery condition.
AC:Appears when AC power is present. If not displayed, the system is operating on backup battery power.
CHIME: Appears when the Chime feature is activated.
TEST: Appears when the system is in Test mode. Blinks during the last 5 minutes of test.
REC: Appears when the system is in Recording mode.
MESSAGE: Appears when a message has been recorded and has not yet been played back.
BYPASS: Appears when one or more burglary protection zones have been bypassed.
FAULT: Appears at any time a malfunction is discovered in the system; or any time an open is detected in a fire zone; or when a fault in a day/night burglary zone is discovered during a disarmed period. Accompanied by a display of the zone number in trouble.
PH:Appears in place of the clock when the speaker phone mode is active.
PC:Appears during a remote phone control session.
LED Meanings
ARMED LED: ON = System armed
(Red) | OFF = System disarmed |
| Blinking = System armed, but a fault exists |
| Blinking alternately with READY LED = AVM (VOX or Talk) or speaker phone mode |
| is active |
READY LED: | ON = System disarmed, ready to arm |
(Green) | OFF = System armed |
| Blinking = System disarmed, not ready to arm (a fault exists) |
| Blinking alternately with ARMED LED = AVM (VOX or Talk) or speaker phone |
| mode is active. |
– 14 –
