Hooking Up the TV/VCR, Rod Antenna | Philips CCB 252AT instruction

6 Hooking Up the TV/VCR

1

Hook up your TV/VCR using one of the connections shown.

A.

Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna

Connect a Cable signal or an antenna to the ANT(enna) Jack.

ANT.

ANT.

B.

Hooking Up Your TV/VCR With a Cable Box

To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box.

C.

Hooking Up Your TV/VCR With an Indoor Antenna

To install a rod antenna (not sup- plied), push the stem of the antenna into the antenna hole on the top of the TV/VCR. Connect the antenna wire to the ANT(enna) Jack on the back of the TV/VCR as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.

Connect the Cable signal to the IN Jack on the Cable Box.

Connect an RF coaxial cable (75-
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on the TV/VCR.	OUT	IN

RF coaxial cable (not supplied)

ANT.

ANT.

Rod Antenna

(not supplied)

ANT.

ANT.

Image 6

Philips CCB 252AT owner manual Hooking Up the TV/VCR, Hook up your TV/VCR using one of the connections shown, Rod Antenna

Contents

CCB252AT Dear Philips product owner For Customer Use Introduction FeaturesSafety Precautions Declaration of Conformity Table of Contents TV/VCR Maintenance Putting Batteries in the Remote ControlUsing the Remote Control Recording Prevention Hook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRRod Antenna Hooking Up the TV/VCR cont’d Crooked Pin Straight Pin You cannot set up channels if you are using a Cable Box Turning On the TV/VCR Language Selection Press the Menu button Automatic Channel Setup Adding/Deleting Channels Press the PLAY/ o button or the STOP/ p button to select Setting the Clock Manual Clock SettingCable Box users must set the clock manually Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel Selection Wait for the TV/VCR to find Manual PBS Channel Selection Button Press the PLAY/ button or the STOP/ button toSelect SET PBS CH. MANUAL. Then, press the F.FWD/B Use the Number buttons to select your PBS station Daylight-Savings Time Time Zone Front Panel AC Power Cord Rear PanelANTenna Jack Remote Control Buttons STATUS/EXIT Button STOP/ ButtonREWind/ Button Menu Button Adjusting the Picture Controls Adjusting the Picture Controls cont’d Decrease IncreaseMore brilliant If you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFF Press the PLAY/ button or the STOP/ button to select Reminder Playing VHS Quasi Play Back Sqpb Recording To stop recording, press the STOP/ button Tape Speeds One-Touch Recording OTR Rerecording Tape Duplication Different brands of equipment may operate differently Timer Recording Daily Timer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Defeat Recording Repeat Play B Repeat Play Insert a tape in the TV/VCR Press the Menu button Repeat Play cont’d Press the STATUS/EXIT button to remove the menu. A-B Real-Time Counter Memory Press the STATUS/EXIT button. The real-time counter will Super High Speed Searching LP/SLP Playback OptionsForward and Reverse Searching SP/LP/SLP Viewing a Still Picture SmartLock SmartLock cont’d Example Specific Ratings To change the access code, follow these steps Rating Explanations Blue Background Ground Sleep Timer Press the SLEEP/WAKE UP button Wake Up Timer Timer Sleep Wake UP TV on ON-TIME Example Closed CaptionInstructions continue on Menu Closed Caption cont’d Half-screen text Volume Bar Automatic Operation Features Specifications Glossary Helpful Hints Helpful Hints cont’d Limited Warranty TV/VCR Combination Index MemoryPage Supplied Accessories