Hooking Up the TV/VCR (cont’d) 7
D.
Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder)
You may need this connection if you want to copy tapes. Details are on page 31.
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO Jack on the front of the TV/VCR.
3CH 
IN 4CH
AUDIO VIDEO
OUT ANT.
INOUT 
AUDIO VIDEO
3CH | IN | |
4CH | ||
| ||
AUDIO VIDEO | ANT. | |
OUT |
INOUT 
AUDIO/VIDEO Jacks on front of TV/VCR
Use a Video cable to connect the VIDEO OUT Jack on the VCR to the VIDEO Jack on the front of the TV/VCR.
2
Plug in the TV/VCR’s power cord.
3
Before you turn on the TV/VCR, go to page eight.
Helpful Hints
•Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
•Audio and video cables are not supplied.
| Bent pin |
Crooked Pin | Straight Pin |
Cable | Plug |
