Automatic Operation Features | Philips CCX133AT guide

Automatic Operation Features 49

The following playback features will always operate:

Automatic Playback

When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. (If a timer recording is set, you may have to press the POWER button to turn on the TV/VCR.)

Automatic Rewind, Eject, Off

When a tape is played, fast forwarded, or recorded to its end, the TV/VCR will rewind the tape, stop, turn itself off, then eject the tape. If a tape counter memory is set, the TV/VCR will only rewind the tape to the point at which the tape counter was set to zero, then stop. The TV/VCR will not turn itself off or eject the tape.

Memory Rewind, Power Off

When the POWER button is pressed while the TV/VCR is rewind- ing a tape, REW → POWER OFF will appear on-screen. The TV/VCR will turn itself off when the tape has finished rewinding.

If a tape counter memory is set, the TV/VCR may only rewind the tape to the point at which the tape counter was set to zero, then turn itself off.

Tape Eject

A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape can not be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

Automatic Tracking Adjustment

The TV/VCR has automatic tracking, which continually adjusts tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the man- ual tracking controls (see below).

Manual Tracking

To adjust the tracking manually during tape playback, press the

CHANNEL Up/Down buttons on the TV/VCR.

NOTES:

•To return tracking to the position it was in when the TV/VCR was shipped from the factory, press the CHANNEL Up/Down buttons on the TV/VCR at the same time.

•Tracking is returned to automatic tracking when a tape is inserted, or when the STOP/▼ button is pressed to halt playback.

Before Tracking	After Tracking
Adjustment	Adjustment

Image 49

Philips CCX133AT warranty Automatic Operation Features

Contents

CCX133AT For Customer Use Dear Philips Magnavox product owner Safety Precautions FeaturesIntroduction Table of Contents Using the Remote Control Putting Batteries in the Remote ControlVCR Maintenance Removing the Shipping Card Hooking Up The TV/VCR Hook up your TV/VCR using one of the connections shownRod Antenna Bent pin Hooking Up The TV/VCR cont’dCrooked Pin Straight Pin Cable Plug Turning On the TV/VCR Press the Menu button to display the pop up menu Language Selection Channel Memory Press the Number 3 button to select ADD/DELETE Channel Adding/Deleting ChannelsEnter the channel number you want to add or delete Press the Menu button Manual Clock Setting Setting the ClockChannels are programmed. Details are on pages 10 Press the Number 6 button to select SET Clock Press the Number 2 button to select SET Manual Clock Setting the Clock cont’d Automatic PBS Channel Selection Setting the Clock cont’dPress the Menu button to display the pop up menu Time Wait for the TV/VCR to findPress the Number 1 button to select SET PBS CH Manual PBS Channel Selection Use the Number buttons to select your PBS station Find the timeNOW Searching flashes on the TV/VCR screen Press the PLAY/ button or the STOP/ button to select Daylight-Saving Time Press the Number 4 button to select SET Time Zone Time ZoneYou cannot select Time Zone at if Auto Clock is set to OFF Front Panel ANTenna Jack Rear PanelConnect your antenna or cable here Details are on pages six seven Remote Control Buttons ALT. CH Alternate Channel Button Volume Up/Down ButtonsChannel Up/Down Buttons Mute Button Adjusting the Picture Controls Decreased brightness Decrease IncreasePress the REWind/- button to decrease a picture control On-Screen Status Displays On Mode Reminder Playing Speed are given below RecordingPress the RECord/OTR button once to start recording Recording options are on pages 30 OTR One Touch RecordingYou can not pause an OTR Different brands of equipment may operate differently Rerecording Tape DuplicationAudio and video cables are not included Select a once, daily or weekly recording Timer Recording Timer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings TV Channels Cable Channels Setting Up the VCR Plus+ Programming SystemLocal TV Stations Call letters Press the Number 5 button to select VCR PLUS+ REF. MAP Examine the lists onPress the STATUS/EXIT button to exit Screen display shown below will appear Press the VCR PLUS+ button on the remote control. The on Timer Recording With the VCR Plus+ Programming System cont’d Record Defeat Record DefeatFollow the steps below to prevent accidental recording If the power fails, you might lose the sleep timer setting Setting the Sleep Timer Example Closed CaptioningMenu Screen Standard Closed Captioning Closed Captioning cont’dText Screen Volume Bar Volume Bar / Smart SoundTo turn Volume Bar On or Off Smart Sound Repeat Playback Insert a tape in the TV/VCR B Repeat Playback Repeat Playback cont’d Real Time Counter Memory Button to reset the real time counter to zeroAppear on-screen While the counter remains on-screen, press the Clear Automatic Operation Features Forward and Reverse Searching SP/LP/SLP Playback OptionsSuper High Speed Searching LP/SLP Viewing a Still Picture Glossary Specifications Helpful Hints Helpful Hints cont’d Please contact Philips at French Speaking English Speaking Limited WarrantyModel # Serial # Index Supplied Accessories