38 Timer Recording With the VCR Plus+ Programming System

Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure:

The clock has been set. If not, CLOCK MUST BE SET appears.

Channels are programmed.

3

 

There is a tape in the TV/VCR (make sure the tape’s record tab

 

is intact and the tape is long enough to record the program).

 

You have completed the steps on pages 36-37.

 

Complete each step within 60 seconds of completing the previous step. If you don’t, you may return to step 1.

1

POWER

1 2

4 5

78

0

SPEED

REW

SLEEP

ALT.CH

3

6o

CHANNEL

9p

+100 o

MUTE

VOLUME

p

o

PLAY

F.FWD +

2

Press the VCR PLUS+ button on the remote control. The on-

STOP

 

screen display shown below will appear.

p

 

REC/OTR MEMORY PAUSE/STILL VCR PLUS+

VCR PLUS+ PROGRAM

MENU STATUS/EXIT CLEAR

SOUND

 

 

SMART

PLUS CODE : – – – – – – – –

1

TO END PRESS EXIT

2

Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record (this number is different for every program, and it can be four to eight digits long). Finally, press the VCR PLUS+ button.

VCR PLUS+ PROGRAM

PLUS CODE : 60590 – – –

TO SET PRESS VCR +

TO CORRECT PRESS CLEAR

TO END PRESS EXIT

3

To record the program once, press the Number 1 button to select ONCE. To record the same program every day from Monday through Friday, press the Number 2 button to select DAILY. To record the same program every week on the same day (such as every Saturday), press the Number 3 button to select WEEKLY.

VCR PLUS+ PROGRAM

1ONCE

2DAILY (MON - FRI)

3WEEKLY

TO SELECT PRESS NUMBER

TO END PRESS EXIT

Helpful Hints

If the power fails, programmed timer recordings will be lost.

You cannot set a timer recording if the TV/VCR is in Record Defeat mode. To set the Record Defeat mode to OFF, see page 40.

If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+ button, the number you entered was incorrect (for example, too short). If this happens, enter the correct num- ber.

CLASH may flash on the screen after you complete step 2. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out.

Page 38
Image 38
Philips CCX133AT warranty Press the VCR PLUS+ button on the remote control. The on, Screen display shown below will appear