Philips CCZ132AT, CCW135AT owner manual One-Touch Recording, Otr

30 One-Touch Recording

The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer.

Before you begin, make sure:

●Channels are set up.

●There is a tape in the TV/VCR. The record tab must be intact.

1

Use the CHANNEL o/p buttons or the Number buttons to select the channel you want to record.

2

Press the SPEED button until the desired recording speed (SP, LP, or SLP) appears on-screen. Details are on page 29.

3

Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will appear.

OTR	LENGTH 0:30
CH12

Press the STOP/EJECT but-
ton on the TV/VCR to stop
4 the OTR.
	POWER			SLEEP
		2	3	ALT.CH
	1					1
	4	5	6	o
				CHANNEL
2	7	8	9	p
		0	+100	o
	SPEED		MUTE	VOLUME
				p
			o
			PLAY
o	REW			F.FWD	o
3			STOP
			p	p
	REC/OTR	MEMORY PAUSE/STILL
				o
	MENU STATUS/EXIT CLEAR			TRACKING

LENGTH : PRESS OTR

CANCEL : PRESS CLEAR

4

To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.

Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote control.

Helpful Hints

•To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.

•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on-screen.

•You can not pause an OTR.

•To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but- ton.

•You cannot record if DEFEAT RECORDING is set to ON. Details are on page 36.

•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.