Philips CD3653Q/37 quick start What’s in the box, Connect, Install, Enjoy

What’s in the box

Base station with

bracket for CD360 Belt clip

OR

Handset

CD365 Line cord* Power supply

User manual Guarantee Quick Start Guide

Note

•In some countries, you have to connect the line adaptor to the line cord, then plug the line cord to the line socket.

•In multi-handset packs, there are additional handsets and chargers with power supply units.

Caution

•Use only the supplied batteries and adaptor

1 Connect

Connect the base station

1Connect the output plug of the power socket to the bottom of the base station.

2 Connect the power socket to a standard wall outlet.

3 Connect the telephone line cord to the phone socket at the bottom of the base station and the wall phone socket.

2 Install

Install the handset

CD365

1The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

2Place the handset on the base station to power up. Note: Charge the batteries for 24 hours before first use.

For more information on the battery icon status, see the User Manual.

3Enjoy

Make a call

flash

1 Press TALK and dial the phone number; or

flash

2 Dial the phone number and press TALK to dial out the call.

Answer a call

flash	to answer the call.
When the phone rings, press TALK or

End a call

exit

Press END .

Adjust the earpiece volume

Press call ID or Ph.Book to adjust the volume during a call.

Set the handset’s ringtone

1Press menu.

2Select [PERSONAL SET] > [HANDSET TONES] > [RING TONES], then press [OK] to confirm.

3Select a ringtone, then press [OK] to confirm. » The setting is saved.

Add a record

1Press menu.

2Select [PHONEBOOK] > [NEW ENTRY], then press [OK] to confirm.

3Enter the name then press [OK] to confirm.

4Enter the number, then press [OK] to confirm.

Call from the phonebook

1Press Ph.Book to access the phonebook.

2Select a contact in the phonebook list.

flash

3 Press TALK to make the call.