Place the batteries as indicated in the battery compartment and replace the battery cover.
3.3Place the handset on the charging cradle
When the battery is fully charged, the talk time of your phone is approximately 12 hours and the standby time is approximately 150 hours. 
Place the handset on the charging cradle of
the base station
Leave it there until the batteries are fully charged
When the handset is fully charged, 
is displayed
3.4Configure your phone
Depending on your country, the WELCOME screen may not appear. In that case, you do not need to select the country code to configure your phone.
Before using your phone, you need to configure it according to the country of use. After charging it for a few minutes, the WELCOME screen appears. Follow these steps to configure your phone :
Press 
to display the list of countries
•Available country will display on the screen.
Note
If 
is pressed, the handset will show the WELCOME screen again.
Press 
/
to scroll to your country
Press 
to confirm your selection
•Your phone is configured according to your selected country and back to idle screen.
Note
Once the country is selected, the default line settings for the selected country will be applied to your phone automatically.
Tip
If you chose the country in use wrongly or would like to change the country after the first
configuration, you can press 
in idle mode to enter into the main menu, then input ##**793 to reset to default settings.
After around 30 seconds, your phone will go back to WELCOME screen for you to select the country again.
3.5How to power off or on the handset power
You can power off your handset in order to save battery power.
Press and hold 
for about five seconds to power off the handset
Press 
to power on the handset again
12 | Getting started |
