Philips CD5000 manual Fading out, Volume adjustment, Locking the volume, Headphone listening

1 CD5000/NLB(1-12) En 01.5.31 3:43 PM ページ10

ADDITIONAL FUNCTIONS

English

PLAYSTOP

HIGHLIGHT SHUFFLE FADE

PROG EDIT PEAK

PREV PAUSE NEXT

PHONESLEVEL

Fading out and in

You can fade out and in CD play, e. g. to stop and start a recording softly.

1Press FADE during CD play to fade out.

y The display shows in steps. The volume is lowered continuously until CD play is paused.

2Press FADE again to fade in.

y The display shows in steps. CD play starts and the volume is raised continuously to its previous level.

Note: You may use FADE anytime when CD play is paused to fade in.

Volume adjustment

The volume of the CD player can be adjusted. This affects the DIGITAL OUT output as well.

•Press VOLUME – or VOLUME + on the remote control. y The volume of the CD player is lowered or raised. The

display shows the actual value between

VOLUME MIN and VOLUME MAX.

Important!

VOLUME –/+ is altering the signal of the output. Before recording set the volume to VOLUME MAX and do not change during recording.

Locking the volume

It is possible to lock the output volume to its maximum. This affects the DIGITAL OUT output as well. Locking the volume can be useful when recording from the CD-player.

•Keep EDIT pressed for more than 2 seconds. If the voulme was unlocked:

y The display shows VOLUME FIXED and the volume is locked.

If the voulme was locked:

y The display shows VOLUME MAX and the volume is unlocked.

Note: If you press VOLUME –/+ and the volume is locked the display shows VOLUME FIXED.

Headphone listening

1Connect your headphones to the 6.3mm PHONES socket.

2Use LEVEL to adjust the volume of the headphones.

Note: The maximum volume on the headphones is set through VOLUME –/+ on the remote control.

Important!

The volume of the headphones is in line with the volume of the output. Therefore do not use VOLUME –/+ during recording.

Scanning the CD

It is possible to listen to the beginning of each track of a CD or program. You can choose whether to play 10, 20 or 30 seconds of each track. If a disc contains CD-Text highlights this part of the tracks is scanned and HIGHLIGHT is displayed.

1Press HIGHLIGHT repeatedly to switch through the different scan modes.

y SCAN 10, SCAN 20, SCAN 30, SCAN OFF… (SCAN OFF aborts the scan function).

2As soon as the desired scan mode is displayed do not press the button again.

y After 1 second scanning starts. The number and remaining time of the actual track, and REM TIME are displayed.

•You can interrupt scan by pressing PAUSE ;. Continue scan by pressing PAUSE ; again.

3Press STOP 9 to stop scanning.

or

• Press PLAY 2 to start CD play with the actual track.

Note: If you press HIGHLIGHT while SHUFFLE is active, shuffle will be stopped before scanning.

10