Philips CD5000 Installation And Remote Control, Accessories, Connections, Mains, Remote control

1 CD5000/NLB(1-12) En 01.5.31 3:43 PM ページ6

INSTALLATION AND REMOTE CONTROL

English

Accessories

This CD player is supplied including:

–a remote control

–2 batteries for the remote control

–a connection cable

–this instruction booklet

Connections

Usual connection, LINE OUT

1Insert the red plug of the supplied connection cable into R and the other plug into L.

2Insert the other side of the cable into the corresponding sockets of the CD or AUX input of your amplifier.

Important!

You may also use the TUNER or TAPE, but never the PHONO input of your amplifier!

Digital connection, DIGITAL OUT

Never connect this socket to a non-digital input – such as AUX, CD, PHONO, TAPE – of an amplifier. This output supplies a digital signal and can therefore only be connected to a digital input.

1Insert an optional coaxial cable into DIGITAL OUT.

2Insert the other side of the cable into the digital input of your digital device (e. g. CD Recorder).

Mains

The type plate is located on the bottom of the CD player.

1Check whether the mains voltage as shown on the type plate corresponds to your local mains voltage. If it does not, consult your dealer or service organisation.

2Connect the mains cable to the wall socket. This switches on the mains supply.

Note: To disconnect the CD player from the mains completely, remove the mains plug from the wall socket.

For users in the U.K.:

please follow the instructions on page 2.

Remote control

									TIME
								1	y
							4
									2
							7	5
						SCAN			3
								8
					–		0		6
									9
				P		VOLU
					REV.		ME	REPEAT
						PLAY
					S		+
					TOP
							N
CD	T	PA					EXT
			USE
	EXT
		SCROLL
		REP		EAT
					A/B

Batteries

•Open the battery compartment of the remote control and insert 2 alkaline batteries, type AAA (R03, UM-4).

Remove batteries if they are flat or the remote control is not going to be used for a long time.

Batteries contain chemical substances, so they should be disposed of properly.

TIME	switches through the different time
	informations
y	switches the CD player to standby
PROG	programs track numbers
FADE	fades CD play out and in
SHUFFLE	plays a CD or a program in random order
DIGITS 0–9	selects a track by number
HIGHLIGHT	plays the beginning of each track or – if a
	CD-Text disc contains highlights – the
	highlights of a CD
REPEAT	repeats a track, a program or the entire
	CD
VOLUME –	decreases the volume level
VOLUME +	increases the volume level
PLAY 2	starts CD play
PREV. ∞	selects the beginning of the current or a
	previous track
NEXT §	selects the beginning of a subsequent
	track
STOP 9	stops CD play and clears a program
5	searches backward
PAUSE ;	interrupts CD play
6	searches forward
CD TEXT	switches through the different CD-Text
	information
SCROLL	scrolls CD-Text information
REPEAT A/B	repeats a selected part of the CD

6