Philips CD5000 manual Recording setup, Buffer and polyethylene bags, protective foam sheet

1 CD5000/NLB(1-12) En 01.5.31 3:43 PM ページ11

ADDITIONAL FUNCTIONS

PLAYSTOP

HIGHLIGHT SHUFFLE FADE

PROG EDIT PEAK

PREV PAUSE NEXT

PHONESLEVEL

Recording setup

It is possible to set up the CD player in a way that it will calculate which tracks will fit on your recording media. It is only possible to use the edit function if a disc has not more than 29 tracks.

If you use NORMAL the recording stops after the last track that fits on one side of your recording media. Notice that CD- Recordables are single-sided only! If you use OPTIMAL some tracks will be skipped to minimise the unused space on your recording media. The sequence of the tracks stays as the original.

1Insert a CD and, if desired, program track numbers.

2Press EDIT to start the setup.

y The display shows NORMAL.

3Press PREV. ∞ or NEXT § to switch through the different scan modes.

y NORMAL, OPTIMAL, STOP… (STOP aborts the edit function).

4As soon as the desired edit mode is displayed press EDIT. y The display shows C 90.

5Press PREV. ∞ or NEXT § to switch through the different recording times and media.

y C 100, C 120, CDR 21, CDR 60, CDR 74, C 30, C 45, C 60, C 90…

Note: C is for cassette, CDR is for CD-Recordable and CD-Rewriteable and therefore for single-sided recording only.

6As soon as the desired recording time and media is displayed press EDIT.

y A, the number of tracks and the playing time are displayed.

7Start your recording and press PLAY 2 to start CD play. y If cassette (C) was selected the CD player pauses after

playing the calculated tracks for side A. If CD- Recordable (CDR) was selected the CD player stops.

8If required switch tape sides.

9Press PLAY 2 to start CD play again.

y B, the number of tracks and the playing time are displayed. The remaining tracks for side B are played.

Note: It is possible to switch between A and B by using PREV. ∞ or NEXT § .

English

Environmental information
All redundant packing material has been omitted. We have	Your set consists of materials which can be recycled if
done our utmost to make the packaging easily separable	disassembled by a specialized company. Please observe the
into three mono materials: cardboard (box), polystyrene foam	local regulations regarding the disposal of packing
(buffer) and polyethylene (bags, protective foam sheet).	materials, exhausted batteries and old equipment.

11