End a call
You can end a call in these ways:
•Press 
; or
•Place the handset to the base station or charging cradle if the auto hang up is activated.
Answer a call
When the phone rings. Press 
or 
to answer the call.
Warning
•• When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid ear damage.
Note
•• The caller ID service is available if you have registered to the caller ID service with your service provider.
Tip
•• When there is a missed call, the handset displays a notification message.
Mute the microphone
1 Press 
during a call.
»» The handset displays [MUTE ON].
»» The caller cannot hear you, but you can still hear his voice.
2 Press 
again to unmute the microphone. »» You can now communicate with the
caller.
Turn the speaker on or off
Press 
.
Make a second call
Note
•• This service is network dependent.
1 Press 
during a call, then press [OK].
»» The first call is put on hold.
2 Dial the second number.
»» The number displayed on the screen is dialed out.
Turn off the ringer for all incoming calls
There are two ways to turn off the ringer:
1 Press and hold 
in standby mode. »» 
displays on the screen.
2 When the phone rings, press [SILENT].
Adjust the earpiece volume
Press 
or 
to adjust the volume during a call. »» The earpiece volume is adjusted and
the phone is back to the call screen.
Answer a second call
Note
•• This is a country dependent setting.
When there is a periodical beep to notify you of an incoming call, you can answer the call in these ways:
1 Press 
and 
to answer the call. »» The first call is put on hold, and you
are now connected to the second call. 2 Press 
and 
to end the current call
and answer the first call.
12EN
