9Advanced settings
Register the handsets
You can register additional handsets to the base station.The base station can register up to 5 handsets.
Auto registration
1 Place the handset on the base station. »» The handset detects the base station
and start to register automatically.
»» Registration is completed in less than 2 minutes.The base station automatically assigns a handset number to the handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
2
3 Press and hold | on the base station for 5 |
seconds until you hear a confirmation beep.
4 Enter the system PIN. Press [CLEAR] to make corrections.
5 Press [OK] to confirm the PIN.
»» Registration is completed in less than 2 minutes.The base automatically assigns a handset number to the handset.
Note
•• If the PIN is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails.
Note
•• The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1 | If two handsets share the same base | English |
| stations, you can unregister a handset |
|
2 | with another handset. |
|
Press menu. |
| |
3 | Select [ADVANCED SET] > |
|
| [UNREGISTER], then press [SELECT] to |
|
4 | confirm. |
|
Enter the system PIN. (The preset PIN |
| |
| is 0000). Press [CLEAR] to remove the |
|
5 | number. |
|
Select the handset number to be |
| |
6 | unregistered. |
|
Press [OK] to confirm. |
|
»» The handset is unregistered.
Tip
•• The handset number displays beside the handset name in standby mode.
Restore default settings
You can reset your phone settings to the original factory settings.
1
2
3 Press [OK] to confirm. »» All settings are reset.
»» The welcome screen displays.
Tip
•• For more information about the default settings, see the section on Default settings.
EN 21
