3.2.1Install battery
!Warning
Always use AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.
1Slide out the battery cover.
2Place the batteries in the correct polarity as indicated and replace the cover.
2The battery icon 
on the display blinks during charge.
3The battery icon 
becomes steady when the handset is fully
charged.
Note
Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of
The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon 
will blink.
Tip
When reaching the range limit and the conversation becomes crackly, move closer to the base.
3.2.2Charge battery
!Warning
The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the alert and any function in progress will not be saved.
1Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed correctly.
12
3.3Welcome mode
Before you first use your handset, you need to configure it according to the country of use. After charging it for a few minutes, the word WELCOME appears in various languages. Follow these steps to configure your phone:
Note
Depending on your country, the WELCOME screen may not appear. In this case, you are not required to select your country/operator/language settings.
You can still make outgoing calls or receive incoming calls without first defining your country selection.
1Press mkey to display a list of countries.
Getting started
