7.7Registration
The procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be registered to one base station.
The Master PIN is required before you can register or unregister handsets.
Note
By default, the Master PIN is 0000.
1On the base station, press and hold p for approximately 5 seconds.
2On the handset, press m key, scroll :to ADVANCE SET and press mOK, scroll :to REGISTRATION and press mOK.
Note
If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat Step 1.
3Enter the Master PIN when prompted and press mOK to
confirm.
Note
By default, the Master PIN is 0000.
4WAITING _ _ is displayed on the screen.
•Upon successful registration, a validation tone is emitted and the handset numbers (1 to 6) will be assigned by the base automatically.
7.8Unregister
1Press m key in idle mode, scroll :to ADVANCE SET and press mOK, scroll : to UNREGISTER and press mOK.
2Enter the Master PIN when prompted and press mOK to confirm.
Note
By default, the Master PIN is 0000.
3Scroll :to select the handset
number to unregister and press mOK.
•A validation tone is emitted to indicate successful unregistration and the screen shows UNREGISTERED.
Note
If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted and the handset returns to idle mode.
To unregister a handset that does not belong to the CD240/245 range, you can only use the CD240/245 handset to unregister it.
7.9Change Master PIN
The Master PIN is used for setting call barring/baby call number and registration/ unregistration of handsets. The default Master PIN number is 0000. The maximum length of the Master PIN is 8 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.
32 | Advanced settings |
