Philips CDC735 owner manual

CDC735comb 4/9/99 5:39 PM Page 11

1

Turn on your receiver/amplifier and select the audio input to which you connected your Compact Disc Changer.

2				5
Press the STAND- With the label side up, carefully
BY-ON button.				place the disc in the holder.
					OPEN/CLOSE
				5-DISC CAROUSEL CD CHANGER	DISC SELECT
				POWER	PLAY/PAUSE STOP
				4	3•
				Press the DISC	Press the
DISPLAY		PROG. STORE		SELECT button on	OPEN/CLOSE but-
DISC1	2	3		the Compact Disc	ton on the Compact
4	5	SKIP		Changer until the	Disc Changer to
TRACK1	2	3		desired disc holder	open the CD com-
4	5	6		moves to the front	partment.
					6•
7	8	9	REPEAT	position.
0			RANDOM	7
H	BPLAY/PAUSEF		G
E		CSTOP	D		Press the
					OPEN/CLOSE
				To start play-
					button to close the
				back, press the
					CD compartment.
				PLAY/PAUSE
					9•
				button.
				8
					Press the
					OPEN/CLOSE but-
				To stop play-

back, press the	ton to open the CD
	compartment and
STOP button.
	remove the disc.

NOTES

•Do not force the compartment to open or close. You might damage its loading mechanism.

•If you use 3-inch CDs, place the discs in the middle of the holders.

•After the Compact Disc Changer plays all tracks on the current disc, the Compact Disc Changer automatically loads the next disc and plays all of its tracks. After it plays all tracks on the last disc, playback stops.

•Do not touch the disc tray while it is rotating.

•Do not load more than one disc into each disc holder.

11 Playing (cont’d)

Playing discs

Your Compact Disc Changer can play stan- dard 5-inch or 3-inch CDs. Before playing a disc, make sure the Compact Disc Changer and the receiver/amplifier are connected (see

1

Turn on your receiver/amplifier and select the audio input to which you connected your Compact Disc Changer (CD, AUX, or TAPE).

2

Press the POWER button on the Compact Disc Changer. The display illuminates.

3

Press the OPEN/CLOSE button on the Compact Disc Changer to open the CD compartment.

4

Press the DISC SELECT button on the Compact Disc Changer until the desired disc holder (Disc 1, Disc 2, etc.) moves to the front position.

5

With the label side up, carefully place the disc in the holder.

Repeat steps 4 and 5 to load more discs.

6

Press the OPEN/CLOSE button to close the CD compartment. The number of the disc in the play position and its total number of tracks appear on the display. Press the DIS- PLAY button on the remote control to dis- play the total playing time of the disc.

7

Press the PLAY/PAUSE button to play the disc in the play position. Playback will begin with Track 1.

8

Press the STOP button to stop playback.

9

Press the OPEN/CLOSE button to open the CD compartment. Remove the disc and return it to its case.