CDC735comb 4/9/99 5:39 PM Page 5
5 Before Using Your Compact Disc Changer
Putting Batteries
in the Remote Control
1
Remove the battery compartment cover on the bottom of the remote control by sliding it in the direction of the arrow.
2
Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated.
3
Replace the battery compartment cover.
Handling discs
Always hold the disc by the edge, and keep it in its case when it is not in use. Fingerprints and scratches on the disc’s surface can prevent the laser beam from correctly reading the digital information.
For details on cleaning discs, see page 16.
Using the Remote Control
Point the remote control at the Compact Disc Changer’s remote sen- sor, making sure to stay within the angle shown.
Do not put objects between the remote control and the Compact Disc Changer.
| OPEN/CLOSE |
DISC SELECT |
PLAY/PAUSE STOP
POWER
60˚
DISPLAY |
| PROG. STORE |
DISC1 | 2 | 3 |
4 | 5 | SKIP |
TRACK1 | 2 | 3 |
4 5 6
7 8 9 REPEAT
0RANDOM
H BPLAY/PAUSEF G
E CSTOP D
NOTES
•The remote control and its batteries are supplied.
•Do not mix alkaline and manganese batteries.
•Do not mix old and new batteries.
