CDC735comb 4/9/99 5:39 PM Page 16
16
Specifications/Care and Maintenance
Specifications
Frequency Response 20 - 20,000Hz
Harmonic Distortion |
| |
20kHz Low Pass Filter | 0.01%(1kHz) | |
Separation | 83 dB |
|
Wow and Flutter
Not measurable
Diameter
Sampling Frequency
44.1kHz
Oversampling
8 times
Quantization Number
16 Bit Linear
Transmission Bit Rate
4.3218 MHz
Type
Optical pick up
Object Lens Drive System
Optical Source:
Semi conductor laser
Wavelength
770~795 nm
Tracking System
Three beam system
Power Requirement 120V ± 10%, 60Hz ± 5%,
Power Consumption
10 W
Operating Temperature 41°F (5°C) to 104°F (40°C)
Relative Humidity 10% to 80%
Weight
7.9 lbs. (3.6 kg.)
Dimensions
Care and Maintenance
The Compact Disc Changer is an example of superior design and craftsman- ship. The following suggestions will help you care for the Compact Disc Changer so that you can enjoy it for years.
●Use a soft cloth to wipe the disc. Wipe the disc in a straight line from the center to the edge.
●Wipe the Compact Disc Changer with a damp- ened cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the Compact Disc Changer.
●Keep the Compact Disc Changer dry. If it gets wet, dry it immediately. Liquids can contain minerals that can corrode the electronic circuits.
●Handle the Compact Disc Changer gently and carefully. Dropping it can damage circuit boards and can cause the product to work improperly.
●Use and store the Compact Disc Changer only in normal temperature envi- ronments. Temperature extremes can shorten the life of electronic devices, damage batteries, and distort or melt plastic parts.
●Keep the Compact Disc Changer away from dust and dirt.
●Modifying or tampering with the Compact Disc Changer’s internal compo- nents can cause a malfunction and might invalidate the warranty.
NOTE: Designs and specifications are sub- ject to change without notice.