RECORDING

English

Listen mode recording from internal CD player

 

 

 

 

 

 

 

EASY JOG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STORE/MENU CANCEL/DELETE

PLAY/PAUSE

STOP

OPEN/CLOSE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD

 

 

 

 

ENTER

 

 

 

 

 

OPEN/CLOSE

PLAY/PAUSE

STOP

RECORDING

FINALIZE

 

 

 

 

 

 

 

 

 

 

 

 

TYPE

 

ERASE

EXT

SOURCE

 

 

 

 

 

 

 

 

 

RECORD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CDR

 

 

 

 

 

 

 

 

 

 

PROG

SHUFFLE

DISPLAY

SCROLL

REPEAT

DJ MODE

 

 

During Listen mode recording you listen to the recording while you are making it.

Preparing for Listen mode recording

1 Make sure that the recording disc is absolutely free of scratches and dust particles.

2 For recording, press RECORDING-TYPE twice:

the display first shows the selection.

the RECORD label starts blinking. After 3 seconds the display shows the remaining CDR(W) recording time on the left and total time of source on the right. (every 2 seconds PRESS RECORD is displayed) The left selection indicator is lit.

REM

REC

TIME TRACK

TOTAL REM

TRACK

TIME

 

STEP

SYNC MANUAL

RECORD

 

 

PROG

 

 

 

 

 

 

 

 

DIGITAL I

CD

CHANGER

 

CD

SHUFFLE ALL

OPTICAL I

RW

 

 

RW

REPEAT

TRACK

ANALOG

 

 

 

SCAN

 

 

 

 

 

REM

REC

TIME TRACK

TOTAL REM

TRACK

TIME

 

STEP

SYNC MANUAL

 

RECORD

 

 

PROG

 

 

 

 

 

 

 

ALL

DIGITAL I

 

CD

CHANGER

 

CD

SHUFFLE

OPTICAL I

 

RW

 

 

RW

REPEAT

 

ANALOG

 

 

 

SCAN TRACK

 

 

 

 

 

REM

REC

TIME TRACK

TOTAL REM

TRACK

TIME

 

 

STEP

SYNC MANUAL

 

RECORD

 

 

PROG

 

 

 

 

 

 

 

 

 

ALL

DIGITAL I

 

CD

CHANGER

 

CD

SHUFFLE

OPTICAL I

 

RW

 

 

RW

REPEAT

TRACK

ANALOG

 

 

 

SCAN

 

 

 

 

 

If DOES NOT FIT appears on the display, there is not enough recording space left on the CDR(W) disc.

You can press RECORDING-RECORD: only complete tracks that still fit on the CDR(W) will recorded.

or

You can press PROG to select one or more tracks for recording (see programming):

-rotate the EASY JOG/ENTER key to the required track number, then press the key (or ENTER on the remote control)

or

-directly select the track number via the 10-keypad on the remote control then press the ENTER key to confirm your selection and go to the next step.

3 Play the source first to set the optimal recording level on the CD recorder.

4 Rotate the EASY JOG/ENTER key until, on the Record/Play Level bar, all the blue segments are alight, but the red segments do not light continuously during the loudest passages.

Display shows _XX DB (Decibel, e.g. -3DB).

5 Stop the source.

Start Listen mode recording

1 To start recording,

press RECORDING-RECORD.

WAIT lights up.

RECORD lights continuously and

the selected track or program is copied at normal speed. The track number and the recording time left will appear.

To check the track time, press DISPLAY. This can be done during recording.

Recording will stop automatically.

Note: Copy prohibited tracks will be copied analogue. ANALOG REC is displayed.

2 To stop recording, press STOP.

UPDATE lights up, RECORD goes out and recording stops. (Minimal track length must be 4 seconds otherwise silence will be added to the track.)

If STOP was pressed within 3 seconds after RECORDING- RECORD, no recording will take place.

After recording, the display shows UPDATE for several seconds. The Total time indications can differ slightly. However, no music information is lost.

Note: In this Recording mode, the Pause function is not operative.

Important:

If you want to play the recorded CDR disc on any regular CD player, it must first be finalised. See finalising discs.

Finalised CDRW discs play only on CDRW compatible CD players.

18

Page 19
Image 19
Philips CDR778 Listen mode recording from internal CD player, Preparing for Listen mode recording, Press RECORDING-RECORD