xp CDR 820/17 eng.
|
|
| Installation | |
|
|
|
|
|
| Analog connections | Digital connections | ||
| These connections are required for playback and recording via |
| Direct digital coaxial connection | |
| an amplifier/receiver, equipped with an analog in- and outputs. |
| This connection is required for direct recording from a digital | |
|
|
| coaxial source (e.g a CD player, DVD, DAT). | |
English
3
1
RECORD PLAYER
CD PLAYER
3
AMPLIFIER/
RECEIVER
2
CD PLAYER
3
CD RECORDER
1Connect a digital coaxial cord between the DIGITAL IN- jack on the set and the DIGITAL OUT jack of the digital source.
➜Recording can now be done via the digital coaxial input (AUX Digital).
CD RECORDER
1Connect supplied audio cord between the ANALOG
2Connect supplied audio cord between the ANALOG IN- jacks on the set and the analog outputs of the amplifier/receiver (CDR OUT,TAPE OUT, AUX OUT, REC OUT etc.).
Insert the red plugs into the R jacks, and the white plugs into the L jacks.
3Connect all other components of your system (tape deck, CD player, tuner, record player etc.) via their ANALOG
➜Any analog device, connected to the amplifier/receiver can now be used as recording source (AUX Analog).
This connection is required for direct recording from a digital optical source (e.g. a CD player, DVD, DAT).
CD PLAYER
2
CD RECORDER
1Remove the dust caps from the digital optical connections of both source and CD recorder. Keep the caps in a safe place.
2Connect an optical
between the OPTICAL IN jack of the 
set and the OPTICAL OUT jack of
the source.
Make sure you insert both plugs fully, until a click is heard.
➜Recording can now be done via the digital optical input (AUX Optical).
13
