Philips CDR820/17 manual A-B editing, on CD changer only, Special features, English

xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 28

English

Special features

A-B editing		Clearing the A-B edit
(on CD changer only)	1	Press NO during stop.
		➜ Clear A-B ? is displayed.
	2	Press YES to clear the markers.
		➜ The markers A-B are cleared.
		Note: If you open the CD changer tray the A-B edit is deleted.

You can create a “track” by marking a passage of music within one track on the current disc.This new “track” can be used for recording or playing.The minimum track length is 4 seconds.

Note:You can only make an A-B edit for a normal Audio

CD(RW).

1Press A-B EDIT on the set.

➜EDIT TRACK starts blinking, Track and the current track number ? are displayed.

2Rotate the ¡ EASY JOG ™ control until the desired track number is displayed.

3Press YES to confirm the selected track.

➜From A = XX : XX and the track time will be displayed. The first 4 seconds of the track will be played continously.The initial position of marker A is always the start of the chosen track.

0To fast forward to the desired start position press 5 or 6 on the set.

0To fine tune the position then rotate the ¡ EASY JOG ™ control.

4Press YES or A-B EDIT to confirm the position of marker a.

➜To B = XX : XX and the new “track” time will be displayed.The first 4 seconds before marker position B until marker position B will be played continously.The initial position of marker B is always the position of marker A plus 4 seconds.

0To fast forward to the desired stop position press 5 or 6 on the set.

0To fine tune the position rotate the ¡ EASY JOG ™ control.

6Press YES or A-B EDIT to confirm the marked passage.

➜EDIT TRACK is shown, A-Band the track edit time are displayed.

➜The new “track” will be stored.

0 Press PLAY/PAUSE 2/; to play the ”track”.

0Press RECORD to record the ”track” (also see ”Recording”).

Note: A-B EDIT can also be pressed during play.The Track Edit procedure will then start from the position where A-B EDIT was pressed.

28