Philips CEM220 user manual 5mm, Mount in the dashboard

4Connect the supplied standard connector to the unit.

4 Ensure that car dashboard opening is within these measurements:

Mount in the dashboard

1If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery.

•If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lose its memory.

•If the car battery is not disconnected, to avoid short-circuit, ensure that bare wires do not touch each other.

2Remove the two screws on the top of the unit.

	5mm
1
83	mm
	53mm

3Remove the mounting sleeve with the supplied disassembly tools.

10EN