Philips CEM3000 user manual Install remote control battery, Turn on, Select country/region

3Press the left side of the panel until the mechanism locks it into place.

Install remote control battery

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•Risk of decreased battery life! Never mix different brands or types of batteries.

•Risk of product damage! When the remote control is not used for long periods, remove the batteries.

•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate.

For first-time use:

1Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1Open the battery compartment.

2Insert one CR2025 battery with correct polarity (+/-) as indicated.

3Close the battery compartment.

Turn on

1Press to turn on the unit.

•To turn off the unit, press for over 3 seconds.

Select country/region

Note

•Select correct country/region for this unit, otherwise the unit can not work properly.

1 Press to turn on the unit.

»[SELECT OPERATING REGION] is displayed.

2Rotate to select an option:

•[USA] (United States)

•[Latin] (Latin America)

•[Europe] (Western Europe)

•[ASIA] (Asia Pacific)

•[Mid-East ] (Middle East)

•[Russia] (Russia)

3Press to confirm.

10EN