Philips D5 Switching the system on, Switching the system to standby mode, Selecting the Source

Switching the system ON

•Press DVD, CD, TUNER or AUX.

You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.

Switching the system to standby mode

•Press STANDBY ON or B on the remote control.

™The system will switch to standby mode.

Switching the system to power save mode (when Demonstration mode

is disabled)

•Press POWER SAVE to switch to energy saving mode ( < 2 watts ).

™"LOW POWER STANDBY ON" will be displayed, after which the display screen goes blank.

™The low power STANDBY ON LED will be lit.

Note:

–if the demonstration mode has not been disabled, it will resume 5 seconds later.

Selecting the Source

•Press the desired source selection button: DVD, CD, TUNER or AUX.

™The display indicates the selected source.

Note:

–For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/ CDR IN terminals.

Dim mode

You can select the desired brightness for the display.

•Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.

™The DIM appears on the display.

™"DIM 1", "DIM 2", "DIM 3" or "DIM OFF" will be displayed depending on the mode selected.

DIM OFF - normal brightness with Spectrum Analyzer On

FTS	TITLE		CHAP.	FM LW A M W	SLEEP DIM	TIMER
P1	P2	P3		P4	P5	P6

DIM 1 - normal brightness with Spectrum Analyzer Off

FTS	TITLE		CHAP.	FM LW A M W	SLEEP DIM	TIMER
P1	P2	P3		P4	P5	P6

DIM 2 - half brightness with Spectrum Analyzer On

FTS	TITLE		CHAP.	FM LW A M W	SLEEP DIM	TIMER
P1	P2	P3		P4	P5	P6

DIM 3 - half brightness with Spectrum Analyzer Off and all LEDs on the system will be switched off.

FTS	TITLE		CHAP.	FM LW A M W	SLEEP DIM	TIMER
P1	P2	P3		P4	P5	P6

OPERATING THE SYSTEM

Volume Control	English
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.

MUTE (on remote control only)

This feature allows you to temporarily switch off the sound without switching off the system when you require a moment of silence.

1Press MUTE on the remote control to switch off the sound.

™ "MUTE" will be displayed.

2Press MUTE again on the remote control or increase the VOLUME level to switch on the sound.

15

1pg 01-42/D5/22-Eng new 15 9/14/00, 8:36 AM 3139 115 20032