Radio Reception

Tuning to radio stations

1Press TUNER to select the tuner source.

2Hold S/T and then release the button. ➜ The system will start searching for a radio station with sufficient signal strength.

3Repeat step 2 if necessary until you find the desired station.

●To tune to a weak station, press S/T briefly and repeatedly.

Programming radio stations

You can store up to a total of 20 radio stations in the memory.

Automatic programming

Automatic programming will start at preset number 1 and all your former presets will be overridden.

●Press PROG/ CLOCK for more than 3 seconds to activate programming.

➜ All available stations are programmed.

Manual programming

1Tune to your desired station (refer to “Tuning to radio stations”).

2Press PROG/CLOCK to activate programming.

➜ PROG flashes in the display.

3Press ALBUM/PRESET 3 4 to allocate a number from 1 to 20 to this station.

4Press PROG/CLOCK again to confirm the setting.

➜ PROG disappears, the preset number and the frequency of the preset station are shown.

5Repeat the above four steps to store other stations.

●You can override a preset station by storing another frequency in its place.

Tuning to preset radio stations

●Press ALBUM/PRESET 3 / 4 until the desired preset station is displayed.

English

17

Page 17
Image 17
Philips DC199B Radio Reception, Tuning to radio stations, Programming radio stations, Tuning to preset radio stations