Philips DC199B quick start Basic Functions

Basic Functions

Important!

Before you operate the system, complete the preparation procedures.

Switching the system to standby mode

●Press STANDBY-ONB (or B on the remote control).

➜ The volume level (up to a maximum volume level of 12), last selected mode, source and tuner presets will be retained in the system's memory.

Power Saving Automatic Standby

As a power-saving feature, the system automatically switches to standby 15 minutes after a USB connected device has reached the end of the last track and no control is operated.

Adjusting volume and sound

1Press VOLUME -/+to decrease or increase the volume.

➜ Display shows the volume level VoL and a number 0-32.

2Press DBB to switch bass enhancement on or off.

➜ If the DBB is activated, DBB appears.

3Press MUTE on the remote control to interrupt sound reproduction instantly.

➜ Playback will continue without sound and MUTE appears.

●To activate sound reproduction you can:

–press MUTE again;

–adjust the volume controls;

–change source.

Adjusting the display backlight

During playback or standby mode, press

REPEAT ALARM once or more to toggle between BRIGHT ➜ MEDIUM ➜ OFF.

English

Switching the system on

●Press STANDBY-ONB (or B on the remote control).

➜The system will switch to the last selected source.

●Press either USB/AUX, iPod or TUNER on the system /remote control.

➜The system will switch to the selected source.

15